3D printing hybrid organometallic polymer‐based biomaterials via laser two‐photon polymerization

Materials with microscale structures are gaining increasing interest due to their range of technical and medical applications. Additive manufacturing approaches to such objects via laser two‐photon polymerization, also known as multiphoton fabrication, enable the creation of new materials with diverse and tunable properties. Here, we investigate the properties of 3D structures composed of organometallic polymers incorporating aluminium, titanium, vanadium and zirconium. The organometallic polymer‐based materials were analysed using a variety of techniques including SEM, energy‐dispersive X‐ray spectroscopy, X‐ray photoelectron spectroscopy analysis and contact angle measurements and their biocompatibility was tested in vitro. Cell viability and mode of death were determined by 3‐(4,5‐dimethyl‐2‐thiazolyl)‐2,5‐diphenyl‐2H‐tetrazolium bromide (MTT) assay and acridine orange/ethidium bromide staining. Polymers incorporating Al, Ti and Zr supported cell adhesion and proliferation, and showed low toxicity in vitro, whereas the organometallic polymer incorporating V was shown to be cytotoxic. Inductively coupled plasma optical emission spectrometry suggested that leaching of the V from the organometallic polymer is the likely cause of this. The preparation of the organometallic polymers is straightforward and both simple 2D and complex 3D structures can be fabricated with ease. Resolution tests of the newly developed organometallic polymer incorporating Al show that suspended lines with widths down to 200 nm can be fabricated. We believe that the materials described in this work show promising properties for the development of objects with sub‐micron features for biomedical applications (e.g. biosensors, drug delivery devices, tissue scaffolds etc.). © 2019 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

Origin of the temperature stability of dielectric constant in CaCu3Ti4O12

The temperature and dc bias stability of the dielectric constant and loss tangent of CaCu₃Ti₄O₁₂ samples sintered under different oxygen atmospheres are discussed. The results suggest that the metal-oxygen vacancy related defects not only provide the charge carriers for the conduction (defect doping) but also contribute to the huge permittivity in the way of defect dipoles repositioning under charge carrier hopping. The charge localization in a specific copper-oxygen vacancy defect complex is the reason of the huge and stable permittivity and low dielectric loss in the middle temperature range, 90 K-200 K (20 Hz), while the implementation of the large barrier layer height needs a contribution by the titanium oxygen vacancy related trap charges in the grain boundaries, which also lead to a second permittivity stable range in a higher temperature range 200 K–300 K.     

正电子湮没研究Al、Nb共掺CaCu3Ti4O12陶瓷高介电常数机理

关于CaCu₃Ti₄O₁₂陶瓷的高介电常数机理，目前广泛接受的是非本征的内阻挡层电容模型。该模型认为在多晶中元素变价、缺陷和非化学计量比等导致的半导化晶粒被绝缘晶界层，即内阻挡层所包围。其中内阻挡层的厚度对材料的介电性能影响较大，而扫描电子显微镜（SEM）测试表明样品晶界呈稀烂的果酱状，SEM难以测量晶界区域绝缘内阻挡层厚度。本文采用正电子湮没技术表征其厚度，通过对CaCu₃Ti₄O₁₂陶瓷共掺不同浓度的Al、Nb（CaCu₃Ti_4-xAl_0.5xNb_0.5xO₁₂，x=0.2%、0.5%、5.0%）改变其晶粒和晶界的微观结构，研究CaCu₃Ti₄O₁₂陶瓷高介电常数机理。正电子湮没结果显示，掺杂样品符合多普勒展宽谱S参数的变化趋势与平均寿命的变化趋势一致。x=0.5%掺杂样品的介电常数最高，其平均寿命、S参数和湮没长寿命成分均最小，阻挡层最薄。实验结果验证了描述CaCu₃Ti₄O₁₂陶瓷高介电常数机理的内阻挡层电容模型的预测。     

Stabilizing temperature-capacitance dependence of (Sr,Pb, Bi)TiO3-Bi4Ti3O12 solutions for energy storage

(1-x)Sr_0.7Pb_0.15Bi_0.1TiO₃-xBi₄Ti₃O₁₂ ((1-x)SPBT-xBIT, x = 0-0.125) bulk ceramics were developed and calcined via the solid-state method, aimed at the application of pulsed power capacitors. The phase structures, temperature stability, hysteresis loop, and discharge properties were systematically investigated. Considering both the temperature stability and dielectric properties, 0.925SPBT-0.075BIT bulk ceramics with a capacitance variation satisfying the X7R specification were developed for pulsed power capacitors. The energy storage density was 0.252 J/cm³, and the ceramics showed high temperature stability at 80 kV/cm. The discharge current waveforms of the 0.925SPBT-0.075BIT ceramics were recorded. A high discharge power density of approximately 1.01 × 10⁸ W/kg with an 8 Ω load resistor and short discharge period of 84 ns were achieved at 50 kV/cm. The good temperature stability properties and high power density show that the 0.925SPBT-0.075BIT ceramics are well suited for pulsed power capacitors with a wide temperature range.     

Friction Behavior of Human Skin Rubbing against Different Textured Polymeric Materials Obtained by a 3D Printing Microfabrication Technique

Understanding friction behavior of human skin is indispensable in order to optimize surfaces and materials in contact with the skin. The coefficient of friction (COF) for different materials contacting against the skin is mainly influenced by the nature of the materials, mechanical contact parameters, and physiological skin conditions. The aim of the present research work was to study the grip effect of two different polymeric materials by producing different textured patterns using a 3D printing microfabrication technique and a replication technique. It was found that under the same contact conditions, a difference in the friction amplitude exists between the two different polymeric materials and that positive texturing, which consists of high relief or protrusions, showed higher COFs than negative texturing, consisting of low relief, holes, or dimples, which showed a decrease in friction as the textured pattern area density increased.     

Cyanogenic,carotenoids and protein composition in leaves and roots across seven diverse population found in the world cassava germplasm collection at CIAT,Colombia

The objective of this study was to characterise the nutritional potential of leaves and identify a diversity centre with low cyanide and high nutrient content among 178 Latin American cassava genotypes. This field-based collection represents the seven diversity centres, held at The International Center for Tropical Agriculture (CIAT Palmira, Colombia) by the Cassava Program. The cyanide, all-trans-β-carotene and lutein concentrations in cassava leaves ranged from 346 to 7484 ppm dry basis (db), from 174–547 μg g⁻¹ db and 15–181 μg g⁻¹ db, respectively. Cassava leaves also showed significant levels of essential amino acids leucine, lysine, phenylalanine, valine and threonine, and average total protein content of 26.24 g 100 g⁻¹ db. Among seven diversity centres, South American rainforest group showed low cyanide and high carotene content in leaves. In addition, VEN77 and PAN51 genotypes stood out for having low cyanide in leaves and roots and high carotene in leaves. This genetic diversity can be used to select high potential progenitors for breeding purposes.     

The effect of moderate pulsed electric fields on autolysis of Saccharomyces cerevisiae and the amino acid content in autolysates

The effect of moderate pulsed electric fields (MPEF) strength on autolysis of Saccharomyces cerevisiae was evaluated in this study. After exposure to MPEF with intensity of 7 kV cm⁻¹ for 4 ms, the integrity of the cell wall was obviously destroyed and the inactivation of S. cerevisiae reached 99.43%. During the subsequent 42-h autolysis process, the release of free α-amino nitrogen of MPEF-treated cells, as well as extracellular protease activity, was significantly (P < 0.05) higher than that of untreated cells. Moreover, exposure to 7 kV cm⁻¹ led to an increase of the total amino acid of 149.36%. In particular, the content of aspartic acid and glutamic acid which are important umami flavour precursors increased by 232.55% and 209.40%, respectively. These results indicate that MPEF will be an effective method to accelerate autolysis of S. cerevisiae for obtaining high-quality yeast extract as flavour enhancers and nutrition supplements.     

Four phenolic acids from purple sweet potato and their effects on physicochemical,digestive and structural characteristics of starch

Liquid chromatography coupled with tandem mass spectrometry (LC–MS/MS) was employed to investigate free phenols that were released from purple sweet potato (PSP) by alkaline, acid and enzymatic hydrolysis. Four phenolic acids, including ferulic, isoferulic, 4-hydroxybenzoic and caffeic acids, were identified. Based on their effects on the characteristics of purple sweet potato starch (PSPS), the four phenolic acids were studied. Furthermore, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT–IR) and X-ray diffraction (XRD) techniques were employed to explore the microstructures of the complexes of the phenolic acids and PSPS. The obtained results demonstrated that the pasting, thermal, retrogradation, as well as digestive properties of PSPS were all influenced by the phenolic acids which interacted with PSPS through noncovalent hydrogen bonds. The influence of the four phenolic acids on the properties of PSPS was in the descending order: 4-hydroxybenzoic acid > ferulic acid > caffeic acid > isoferulic acid.     

Producing Fatty Acid Methyl Esters from Free Fatty Acids with Ionic Liquids as Catalyst

Three Brønsted acidic imidazole dicationic ionic liquids (ILs) with different length of alkyl chains, [C_n(Mim)₂][HSO₄]₂ (n = 3, 6, 12), were prepared and used as catalyst for the esterification reaction of free fatty acids and methanol. Taking oleic acid as model acid, the catalytic performances of the synthesized ILs for the esterification were evaluated. The main physicochemical properties of the ILs, thermal stability, acidity, solubility in common solvents, and causticity on Austenitic stainless steel 316, were examined. [C₃(Mim)₂][HSO₄]₂ demonstrated the highest catalytic activity and enabled to assess the preliminary optimum esterification condition of oleic acid and methanol. Under optimized reaction conditions, the yield of oleic acid methyl ester was up to 95 %. The ILs have great potential as catalysts for producing fatty acid methyl esters from long‐chain free fatty acids.